0820061752 – Aventics TC08-5/3CC-DO-110AC-E-FORM_C-VTS
₨125,000.00
General Description
The part 0820061752 corresponds to a valve in the TC08 series of Aventics (Bosch Rexroth) pneumatic directional valves.
Its model string is: TC08-5/3CC-DO-110AC-E-FORM_C-VTS
“5/3” indicates it is a 5-port / 3-position valve.
“CC” suggests the center position is closed center (i.e. in the neutral position, all ports are blocked)
“DO” means it is a double solenoid actuation (two coils, one for each end position)
“110AC” indicates the coil voltage / type: 110 V AC
“E” indicates the design variant (e.g. polymer / standard body, or electrical variant)
“FORM_C” is the connector / plug standard (electrical connection format)
“VTS” may refer to a variant or special option / revision (often used internally)
It is a spool / direction control valve.
It can be used singly or mounted in a valve manifold / modular block arrangement.
4 in stock
Description
0820061752 – Aventics TC08-5/3CC-DO-110AC-E-FORM_C-VTS
Key Specifications & Performance Data
From catalog data (Bosch / Aventics) and cross-reference tables:
Parameter Value Notes / Conditions
Compressed air connection (output) G 1/8 Typical for TC08 series valves.
Operating / working pressure –0.9 to 10 bar This is typical for valves including 5/3 types in TC08 family.
HydraDyne LLC
Control / pilot pressure approx. 3 to 10 bar (depending on variant) Pilot pressure requirement for proper actuation.
Comtec Group
Nominal flow (Qₙ) ~ 700 l/min At standard conditions (often 6 bar, Δp = 1 bar)
Flow conductance (b * C) ~ 0.34 l/(s·bar) Value from catalog listing of 0820061752 in switch table.
Electrical switching times ON: ~10 ms, OFF: ~11 ms For the 0820061752 variant, switch on / switch off times are given as 10 / 11 ms.
Weight ~ 0.165 kg According to the chart entry for 0820061752.
Ambient / medium temperature –10 to +50 °C Standard range in TC08 catalogs.
Temperature of compressed air / medium –10 to +50 °C Same as above.
Maximum particulate / contamination level ≤ 5 µm particles, oil content up to ~5 mg/m³ Typical requirement for clean compressed air for good valve life.
Coil / Electrical connection Form C connector (ISO 15217 standard plug), 2 solenoids (double) Matching “FORM_C” spec in the part number.
Manual override Yes (with detent) Many of the TC08 valves allow manual override.
Sealing / spool characteristic Soft sealing, positive overlapping spool Standard for TC08 series; overlapping spool ensures defined deadband.
Mounting Single or manifold / block mounting possible Valve block / manifold compatibility is part of the system design.
Related products
-
-
Add to cart
- Uncategorized
DATA INTERFACE BOARD
- ₨25,300.00
-
-
Reviews
There are no reviews yet.