CAM SWITCH VSN32

• Switches from the VSN line are cam switches with switching programmes comprised of the shape and number of cam cuts.
• The design of the switch makes it possible for two mutually independent switching circuits to be in each level.
• Circuits can be joined together by standardized couplers, both same-level and between levels.
• Switches are mounted to the panel using M4 screws according to the drilling layout specified for each type. From seven levels onward, it is recommended to mount the switch from the front and back, with respect to the mechanical strength and load from wires.
• All conducting parts are made of brass, copper or silver. Other parts are made of plastic.
• The basic design meets the IP 20 protection standard for the switch body and the IP 65 protection standard for the front sealed side with shaft.
• Switches are insulation class I and II appliance compliant.
• Cam switches can be used in control and power circuits.
• Cam switches exceeding 250 A are supplied in cooperation with KRAUS & NAIMER.

• The basic design meets the IP 20 protection standard for the switch body and the IP 65 protection standard for the front sealed side with shaft. This protection is satisfied for the VSN40 through VSN150 model series once the wires are connected to terminals. If wires are not connected to some of the terminals during assembly, n order to maintain IP20 protection, the terminals of these switches without wires shall be covered with plugs that are part of the standard supply. Plugs can also be ordered separately as a spare part.

Switch assembly:

• The cam switch can be mounted by the face from the front or by the back from the back folding panel – we recommend applying this mounting only up to three levels. Switches longer than 3 levels are recommended to be mounted from the front and back folding panel simultaneously. A universal “rear anchor panel”, which mounts the switch using both screws and DIN panels, can also be ordered separately. “Rear mounting” switches that are ordered already contain this universal “rear mounting panel” (including the DIN panel fixation option).